DuoSeal TX20 sealing plug for wet areas - Fischer

The sealing plug for wet areas

Perfect sealing of the drill hole with no silicone. Tested for watertightness up to the W3-I exposure class according to DIN 18534 and ETAG 022 sealing standards. In all cases, please take into account national regulations on the use of plugs in wet areas. The plug is quick and easy to install. Suitable for all building materials. Combination of two materials ensures high load values.
The DuoSeal can be installed only on tiling/earthenware and for interim assembly. A suitable diamond or tile drill bit must be used to make the drill hole. The DuoSeal is inserted into the drill hole without any additional accessories. The rim prevents the plug from passing through the drill hole and provides sealing. Made from high-quality nylon, the red component automatically adapts to the material into which it is being inserted, it expands, folds or forms a knot depending on whether it is a solid surface, a hollow surface or a board. The soft grey component is pressed against the wall during installation of the screw and completely closes the drill hole. The grooves in the plug compensate for irregularities in the hole, so the sealing function is guaranteed even if the drill hole is not perfect.

See more description

X

From

£32.00

excl. VAT

£38.40 incl. VAT

There are 2 options to select from

A975870

£47.25 excl. VAT

pack of 50 units

A975871

£32.00 excl. VAT

pack of 25 units

The sealing plug for wet areas

Perfect sealing of the drill hole with no silicone. Tested for watertightness up to the W3-I exposure class according to DIN 18534 and ETAG 022 sealing standards. In all cases, please take into account national regulations on the use of plugs in wet areas. The plug is quick and easy to install. Suitable for all building materials. Combination of two materials ensures high load values.
The DuoSeal can be installed only on tiling/earthenware and for interim assembly. A suitable diamond or tile drill bit must be used to make the drill hole. The DuoSeal is inserted into the drill hole without any additional accessories. The rim prevents the plug from passing through the drill hole and provides sealing. Made from high-quality nylon, the red component automatically adapts to the material into which it is being inserted, it expands, folds or forms a knot depending on whether it is a solid surface, a hollow surface or a board. The soft grey component is pressed against the wall during installation of the screw and completely closes the drill hole. The grooves in the plug compensate for irregularities in the hole, so the sealing function is guaranteed even if the drill hole is not perfect.